Sliding System 2017-12-23T13:01:18+00:00
SLIDING SYSTEM

SL-70 Sliding System

SL-70 is a sliding system with extruded aluminium profiles with a vast profiles portfolio and therefore very different solutions can be obtained.

This system includes 70 mm fixed frames and 35 mm mobile frames and allows a maximum filling of 18 mm.

The SL-70 system meets EC marking standards (NP-EN 14351-1:2006).) To verify the said compliance, it was submitted to typical initial tests at a certified laboratory.

ADDITIONAL INFORMATION HERE
SEE THE PROFILES HERE
SEE THE TECHNICAL DATA  FILE

RTC Sliding System

RTC is a perimeter sliding system with thermal break and uses extruded aluminium semi-profiles joined by 14.8 mm polyamide bars and reinforced with glass fibre which grant maximized insulating properties and high mechanical resistance.

This system includes 91 mm bi-rail and 137 mm tri-rail fixed frames and 35 mm mobile frames. This set of fixed frames allows RTC to be a series able to adapt to very different needs.

RTC allows windows and doors of 2, 3, 4 or 6 leaves with maximum filling of 26 mm.

The RTC system meets EC marking standards (NP-EN 14351-1:2006).) To verify the said compliance, it was submitted to typical initial tests at a certified laboratory.

SEE THE PROFILES HERE
SEE THE TECHNICAL DATA  FILE

GNF Slide System

GNF – Slide is a sliding system using extruded aluminium profiles which grant high mechanical resistance.

It includes 45 mm fixed frames and mobile frames of 28 mm allowing maximum filling of 20 mm.

Being a full perimetral series, doors and windows are ensured by cast aluminium squares.

The GNF-Slide system meets EC marking standards (NP-EN 14351-1:2006). To verify the said compliance, it was submitted to typical initial tests at a certified laboratory.

SEE THE TECHNICAL DATA  FILE

C-90 Sliding System

C-90 is a sliding system with extruded aluminium profiles and a vast profiles portfolio, and therefore very different solutions can be obtained.

This system has fixed 1 rail, 2 rails and 3 rails frames and allows openings of 1, 2, 3, 4 and 6 leaves with maximum filling of 24 mm.

The C-90 system meets EC marking standards (NP-EN 14351-1:2006).) To verify the said compliance, it was submitted to typical initial tests at a certified laboratory.

SEE THE PROFILES HERE
SEE THE TECHNICAL DATA  FILE